Useful Nokia IPSO CLISH Commands

This is a quick reference guide to the most popular and widely used Nokia Clish Commands. You can manage the Nokia firewall as much from the Command Line Interface as from Voyager.
---setting default gateway
set static-route default nexthop gateway address 192.168.29.2 priority 1 on
---adding static routes
set static-route 172.23.124.150/32 nexthop gateway address 192.168.29.50 on
---Add proxy arp
add arpproxy address 192.168.29.56 macaddress 0:a0:8e:7d:13:d0
add arpproxy address 192.168.29.57 macaddress 0:a0:8e:7d:13:d0
---Add an interface
set interface eth1 speed 100M duplex full active on
add interface eth1c0 address 192.168.29.54/24 enable
---VRRP
set vrrp accept-connections on
set vrrp coldstart-delay 60
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth2c0 on
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth2c0 priority-delta 10
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth3c0 on
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth3c0 priority-delta 10
set vrrp interface eth1c0 monitored-circuit vrid 54 priority 100
set vrrp interface eth1c0 monitored-circuit vrid 54 hello-interval 1
set vrrp interface eth1c0 monitored-circuit vrid 54 vmac-mode default-vmac
set vrrp interface eth1c0 monitored-circuit vrid 54 backup-address 192.168.29.1 on
---Set ntp servers
add ntp server 10.1.1.2 version 3 prefer yes
add ntp server 10.1.1.1 version 3 prefer yes
---Setting Time zone
set date timezone-city "Greenwich (GMT)"
---Add hostname
set hostname testbox
---Add Host address assignments
add host name testbox ipv4 192.168.29.54